I was setting up OKD on a separate VLAN and wanted to used the OKD DNS service but it just wasn’t working and I felt it was a connectivity/firewall issue but could not find a tool to test. I was … Continue reading
I was setting up an OKD single node cluster and to test if it was up I ran: openshift-install –dir=/opt/okd4/install_dir/ wait-for bootstrap-complete –log-level=debug Then I got the following error messages: https://api.lab.okd.local:6443/api/v1/namespaces/kube-system/configmaps?fieldSelector=metadata.name%3Dbootstrap&limit=500&resourceVersion=0: EOF E0104 15:32:18.605736 1642 reflector.go:153] k8s.io/client-go/tools/watch/informerwatcher.go:146: Failed to list … Continue reading
My OMV server failed and would not start so I had to move the data disks, mirrored and system disk to a new PC. This is some lessons learned. Keep it off the LAN For the exercise of moving the … Continue reading
I had setup a mirrored RAID in OMV and then the PC hardware, not the disks I should emphasize, failed and I needed to move the system disk and two data disks to other hardware. Because I decided to test … Continue reading
Out of the box with the RAID you are likely to find an email everyday with the subject similar to: SparesMissing event on /dev/md/Mirror:nas2 [nas2.cantabrian] This is a somewhat know error, ssh to the box and look for: /etc/mdadm/mdadm.conf You … Continue reading
I am running MythTV on CentOS7 as per MythTV on CentOS 7 and it has been running fine and for no particular reason after cloning the VM it would not start FPM. When I cloned the VM I selected “I moved … Continue reading
I save all my files in FLAC but want to be able to play them on an iPhone with a loss less codec. With Apple devices the only option is ALAC, Apple Lossless Audio Codec. The process I use to … Continue reading
After upgrading my MythTV server from 0.25 to 0.29 as described in MythTV on CentOS 7 I found that the last tab for MythWeb, “Backend Status” was giving me a: 404 Not Found It really had me stumped and then I … Continue reading
I upgraded my WordPress host to CentOS7 with PHP7.3 and everything seemed fine until I went to upgrade and I got: Update WordPressDownloading update from https://downloads.wordpress.org/release/en_NZ/wordpress-5.4.2.zip…Download failed.: cURL error 2:Installation Failed Also from Health check Communicating with the WordPress servers … Continue reading
I got the following error when booting ESXi 6 from a USB key but I believe the same problem is possible for other scenarios. So what I am talking about is you start ESX and it does the initial phase … Continue reading